Well, are the plates identical, or merely symmetrical (mirror images)? The
difference being with the former it doesn't matter, but with the latter it
certainly would. I wouldn't expect them to be marked, at least the kits I
have had never were -- I had to puzzle it out from the skimpy instructions.
on 11/16/04 6:47 PM, James Schulte at schultejim@msn.com wrote:
> First attempt with the tube shocks resulted in a really stiff ride. I think I
> need to adjust the mounting point at the top where it attaches to the body.
> There is another mounting point that will give the shock more travel, which
> should soften it up. I hope (-: Anyone have experience with this? The
> mounting plates are not marked, so they must be generic to either side.
> Jim
> 69C
> 70B
--
Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires
|