I don't know where you are located, but you should be able to find the
screws in any well stocked hardware store. That is certainly true here in
North America. A 10-32 screw will work, but I believe they were originally a
2BA. The UK didn't give over to SAE or UNF hardware and kept BA for small
hardware until they finally went (horrors) metric <grin>. Moss likely
doesn't stock them since they are a common item in most hardware stores.
Cheers,
Lew Palmer
-----Original Message-----
From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net] On Behalf
Of Zach Dorsch
Sent: Tuesday, July 06, 2004 4:26 PM
To: mgs@autox.team.net
Subject: Wire Loom Screws
In the midst of repairing the wiring, I managed to break some of the screws
used for wire loom retainer in the engine compartment. I tried searching
the Moss website, but I couldn't find the screws. I also went to the
hardware store today and they only had stainless that was even remotely
similar to the screws that I removed. By the way, they are size 10 32
(checked with a tap).
Any ideas where I could find these screws? Am I just not looking in the
right place in the moss catalog?
Thanks,
Zach
|