There a white wire with a red tracer that goes from the right side of the
fire wall down to the starter. This wire should have a Lucas connector.
You can split the connecter and supply 12V to this wire, the starter will
'whirl'. So one end of the switch cable goes to the wire I described and
the other end goes to a 12v power supply (a good source for this is any
large brown wire).
Larry Hoy
> -----Original Message-----
> From: owner-mgs@autox.team.net
> [mailto:owner-mgs@autox.team.net] On Behalf Of BarrMark262@aol.com
> Sent: Tuesday, May 04, 2004 10:43 PM
> To: mgs@autox.team.net
> Subject: How to hook up a remote starter
>
>
> Hi List: Sorry for dumb question, but how do you hook up a
> remote starter so
> I don't have to keep asking for help as I attempt to get my
> 74B running?
>
> It has two leads, and a trigger.The instructions only talk
> about Ford, GM and
> Chrysler.
>
> Thanks
> Dennis
|