Re: Cork gasket removal

["James Kleemeyer" <jkk@adams.net>]

Doh!

I  should have mentioned in my earlier post that 3-M makes a Bristle Disk
that is a much better choice for gasket removal. Same quater turn mandrel
but much less likely to remove metal.

Jim K.


> Those are 3-M Roloc discs. Be real careful using them, I have a friend
that
> owns a speed/machine shop and he says that every head he gets that has
been
> cleaned with a Roloc needs to be resurfaced. They will remove metal along
> with the old gasket.