Guys:
Problems and concerns noted. I can't promise any immediate changes to the
spec, but we do now have a system in place for noting problems. From that
system we are going to develope specifications. Currently many of these
items are as supplied by vendor, as we have no specifications or drawings.
nuff said.
Kelvin.
> and it worked. Trouble is, it steers like an 18 wheeler w/out power
> steering. (steering column's in a vice). When I get back from
> work tomorrow,
> I'll see if it compresses any and turns easier. If not, I'll
> try your wire
> wheel approach.
> One thing, though; the bottom bushing was just a bit too lengthy; it
> overlapped once installed in the bottom end of the steering column. I
> uncurled the original, laid it out flat, and found that the
> new one (from
> Moss also) was about 1/8" too long. Laid the original over the new and
> trimmed w/ razor blade. This time it fit perfectly.
> Thanks for your feedback. By the way, it took awhile, but I
> finally figured
> out what BTDT means. :)
>
> -Rick
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|