Jon:
Check your engine ground strap, and clean to bare metal the connections.
Usually the accelerator or heater cable melting is due to a problem with the
continuity of the engine ground strap. The new cable is now a much better
route for the electricity to flow, for a short while.
Kelvin.
> -----Original Message-----
> From: Jon Asdourian [mailto:kriegerii@yahoo.com]
> Sent: Wednesday, July 02, 2003 8:09 AM
> To: mgs@autox.team.net
> Subject: MGC Accelerator Cable
>
>
> I just replace my old rusted out, original accelerator
> cable with a new one, and after taking it for a spin,
> the cable melted. freezing the cable, now my C runs a
> little hot, but not that hot, or everything else would
> have melted, any suggestions or replacement parts,
> thanks in advance , I do need a new cable. you can
> see the beast at
> www.hometown.aol.com/kriegerii/index.html
>
> thanks
>
> Jon
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|