I've had the same when the insulation on the wiring in the wheel arch got
nicked and one wire corroded right through inside the insulation. If the
other lamp lights then you must have power at the right-front connector, so
double check that is clean and check the continuity of the wire from the
bullet there to the lamp unit.
----- Original Message -----
From: "Paul M." <rowman22001@yahoo.com>
To: <mgs@autox.team.net>
Sent: Friday, June 20, 2003 1:04 AM
Subject: Headlamp woes
> I thought my right front headlamp had lost the low
> beam. It works fine on high beam, and the left
> headlamp works on both, but the right headlamp works
> only on high beam.
>
> So I replaced both sealed-beam headlamp units and the
> problem persists. I took them back out and sprayed
> the socket with WD40 (the closest thing to contact
> cleaner I had on hand), but no joy.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|