I removed the one side of the shock arm, undid the four bolts holding the
shock to the x-member and lowered the shock, kingpin and spring pan all
together, you can then pull the shock off the kingpin and cut the swivel pin
off on the bench!
hope this helps
Chris
3/4 of a 73B
Johannesburg
> I've had to cut through the bolt both sides before now. Undo the damper
> clamp bolt and lever the arms apart for more clearance and to avoid
cutting
> into either the arms or the swivel.
>
> ----- Original Message -----
> From: "Jim" <jandr95@starband.net>
> To: <mgs@autox.team.net>
> Sent: Thursday, August 07, 2003 1:31 PM
> Subject: stubborn front damper
>
>
> > Any advice on how to encourage the removal of the top swivel pin on the
> > front suspension?
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|