mgs
[Top] [All Lists]

Re: HIF carb setup

To: "Paul Root" <proot@iaces.com>, <mgs@autox.team.net>
Subject: Re: HIF carb setup
From: "Telewest \(PH\)" <paul.hunt1@blueyonder.co.uk>
Date: Tue, 3 Jun 2003 09:49:40 +0100
Yes, in your case it should have a hose that dumps any overflow onto the
ground clear of the exhaust.

----- Original Message -----
From: "Paul Root" <proot@iaces.com>
To: <mgs@autox.team.net>
Sent: Monday, June 02, 2003 6:47 PM
Subject: HIF carb setup


> 5) Last question, promise. Ok, it's a multi-parter. Hosing.
> Fuel goes into the front carbs front pipe, then out the back to the
> rear carb. The tappet cover pipe splits in a Y and goes to the angled
> outside pipes. That leaves the middle outside pipes. Pictures show, a
> big hoop going from one to the other. I think there is a T on that that
> leads to the absorption canister. Is that right?  I'm leaving the
> emissions stuff on the car (except for the cat).

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>