IIRC, I used a 34mm hub socket purchased at a local auto parts. Took a
couple of trips to get the right one.
Yup, I used a couple of cold chisels as wedges, alternating blows with
hammer till the hub popped off.
Safety Fast!
Gordie Bird
62 MGA
80 MGB
>
>
> The Snap-On 1-5/16" fits just fine. There are a few other brands that also
> fit, but I can't remember them just now. Following Paul Hunt's
> lead, I have
> removed my axle shafts by placing steel wedges behind the hub and then
> wedging them off with a 3lb. hammer.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|