--- Ben Bouchard <benjamb@comcast.net> wrote:
> I have updated my '76 Midget 1500 with a new Weber
> downdraft carb (and
> manifold), Mallory dual point ignition and a new
> coil, ignition resister,
> plugs and leads. It starts OK and accelerates
> strongly but when I am
> running at constant speed, it seems to be missing. I
> have confirmed the
> timing, and that the carb floats are set at the
> right height. I have not
> yet confirmed the fuel pump line pressure but do
> have a new fuel pump to try
> out.
>
>
>
> Any other ideas on where I should be looking for the
> solution?
>
Ben,
Amiss during a no load situation may be something
like a slight dual point dizzy problem..As the
flyweights are running at a constant speed, a slight
miss on a set of points will be noticed more than if
the car is gaining RPM all the time..Also, is there a
slight vaccuum leak somewhere in the line from the
manifold to the dizzy?
Howard
__________________________________
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|