The hazard switch should have six spades. With the switch off two of them
are connected together and the two greens should be connected to these.
These greens power the turn signal which only operates when the hazards are
off. With the switch on the other four are all connected together and the
other four (or three) wires should be connected to these, order shouldn't
matter.
----- Original Message -----
From: <Goracef1@cs.com>
To: <mgs@autox.team.net>
Sent: Friday, November 08, 2002 9:28 PM
Subject: Turn signals
> anyone know what order to connect the wires on the back of
the
> hazard switch in my 70GT?No turn signals or flashers!Best I have gotten is
> right one blinks and left one stays on but ONLY when hazard button is
> on!Grrrrrr!
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|