mgs
[Top] [All Lists]

RE: : MGB ALLOY FLYWHEEL

To: "'Dodd, Kelvin'" <doddk@mossmotors.com>, <mgs@autox.team.net>
Subject: RE: : MGB ALLOY FLYWHEEL
From: "Larry Hoy" <list@marketvalue.net>
Date: Wed, 16 Oct 2002 14:47:33 -0600
My vote is 65-67 MGB.  Based on the hole pattern, it is not a 3 main and
the ring gear appears to be on the clutch side of the flywheel  which
would indicate the starter would be the Bendix style.

Larry Hoy

> -----Original Message-----
> From: owner-mgs@autox.team.net 
> [mailto:owner-mgs@autox.team.net] On Behalf Of Dodd, Kelvin
> Sent: Wednesday, October 16, 2002 9:44 AM
> To: 'stevedevine@rcn.com'; mgs@autox.team.net
> Subject: RE:: MGB ALLOY FLYWHEEL
> 
> 
> I love e-bay.
> 
> 
> The bolt pattern is 5 main, not 3 main, so it won't fit the 
> stated application.  Hard to tell if it is for a non-synchro 
> box or later full synchro.  Looks like it may be the earlier 
> 65-67 application.  
> 
> 
> This could be a good deal for someone running the crash box 
> on a 5 main, which is the popular vintage race setup.
> 
> A picky point, but comparison $479.95 price isn't accurate if 
> referring to the Moss Motors product.  The Moss flywheel is 
> made by Fidanza and features a bolt on replacable wear 
> surface, which ups the cost substantially.
> 
> 
> Kelvin.  

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>
  • RE: : MGB ALLOY FLYWHEEL, Larry Hoy <=