Kelvin -
Thanks! Learn somethin' new every day...
Chris K.
> Chris:
>
> The Z Maggot brake casting is similar to the MGA, but has BSF port
threads.
> You can install an MGA cylinder assembly, but as you say the guts
have to be
> reversed, and you must use one SAE banjo bolt, and one SAE line
adapter.
> Both bits are available.
>
>
> Kelvin.
>
>
> > Larry -
> >
> > Yes. The fronts are the same as on the front-drum MGA, too. The
> > master cylinder is different (same casting, but the brake and
clutch
> > bores are reversed), but the MGA rebuild kit works fine.
> >
> > HTH
> > Chris K.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|