Chris:
The Z Maggot brake casting is similar to the MGA, but has BSF port threads.
You can install an MGA cylinder assembly, but as you say the guts have to be
reversed, and you must use one SAE banjo bolt, and one SAE line adapter.
Both bits are available.
Kelvin.
> Larry -
>
> Yes. The fronts are the same as on the front-drum MGA, too. The
> master cylinder is different (same casting, but the brake and clutch
> bores are reversed), but the MGA rebuild kit works fine.
>
> HTH
> Chris K.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|