If the headlamp flasher lights the main beam and the tell-tale but the
dip-switch dsoesn't light either of them then the problem is almost
certainly in the dipswitch as the two switches have identical wiring out to
the lights. If not, but the tell-tale lights with both switches, then the
problem is in the blue/white wire from the column switches to the Always
assuming the headlamp flasher worked beforehand ...
----- Original Message -----
From: "Carl French" <leylandauto@yahoo.com>
To: "mg list" <mgs@autox.team.net>; "MG-MGB" <MG-MGB@yahoogroups.com>
Sent: Saturday, August 31, 2002 3:14 PM
Subject: No high beams 67B
> Sudden onset of problem, new wiring harness this year. I just put on new
double bullet connectors as the old ones were kinda loose. That did not make
any diff, all connections seem good. I have good low beams. Switch maybe?
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|