At 10:57 PM 5/6/02 -0500, MonteMorris wrote:
>....
>You all said you need a low volume (according to Barney's site around 3
>GPM) pump or you have to fit a pressure regulator?
>Does anyone know if this pump will work on a 67B? ....
Almost any electric fuel pump will work, as long as you don't hook up a
polarity sensitive pump wiith the wrong polarity. If the pump puts our
more than about 3-1/2 psi pressure you will need to add a pressure
regulator to avoid overflowing the carb float chamber(s). Even the
smallest pumps put out plenty of flow volume for the 4-cylinder MG.
Barney Gaylord
1958 MGA with an attitude
http://www.ntsource.com/~barneymg
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|