mgs
[Top] [All Lists]

Re: 1970 MGBGT

To: "Patrick Norris" <pnorris@prismnet.com>, <mgs@autox.team.net>,
Subject: Re: 1970 MGBGT
From: "bill and penny" <wcameyer@email.msn.com>
Date: Sun, 5 May 2002 11:31:43 -0700
take a cotter pin out through
> the hole in the spline.  There is no pin there.
> I look in the center of the hub, and there is a bolt, with a metal
covering,
Pat,
The bolt with metal covering is a seal - pull it straight out and you'll
find the castle nut with its cotter pin right behind it.  I have removed the
bolt/seal with long-nosed pliers, but if its really stuck, the trick is to
thread a nut on it, thread a bolt into that nut, and use this to pull.

Bill

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>