I made a tool suggested to us on this list. I don't remember who
suggested it.
I took two cheap 1/4" square drive flex joints. Disassembled them and
but the two female ends together. Now I can use my 1/4" square drive
ratchet and an extension to adjust the rear brakes.
Larry Hoy
> -----Original Message-----
> From: owner-mgs@autox.team.net
> [mailto:owner-mgs@autox.team.net] On Behalf Of Maynard Hirsch
> Sent: Tuesday, April 23, 2002 3:35 PM
> To: mgs@autox.team.net
> Subject: Re: Bleeding clutch cylinders, now brake adjustment
>
>
> I use an automotive A/C tool. It is a reversible ratchet
> with a 1/4" square hole
>
> Maynard
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|