And if they *are* shorting out to each other they are quite likely to do so
to the gear lever itself and then cook your loom! Fit an in-line, you
should be able to do this at the mass of bullet connectors where the
firewall joins the LH inner wing, where 3 or 4 white/browns join together in
a double connector.
----- Original Message -----
From: "Maynard Hirsch" <mghirsch@netzero.net>
To: <mgs@autox.team.net>
Sent: Sunday, March 24, 2002 6:19 PM
Subject: RE: Overdrive problem
> sounds like a wiring problem. I think that the mini harnes from the OD
switch
> to the OD unit (and lockout) is shorting out.
>> I gently twisted
>> the the top of the knob just playing around. The O/D disengaged. Weird,
ok,
>> tried O/D again and switch out. No luck, twisted knob ever so slightly,
>> bingo, disengaged.
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|