I think you have the needle on the wrong side of the stop!
----- Original Message -----
From: "John Shidler" <allfacts@bellsouth.net>
To: "MG List" <mgs@autox.team.net>
Sent: Wednesday, January 09, 2002 1:24 PM
Subject: Smith Speedometer- Testing
> The Smith Speedometer s/n 5226/03 1280 has obviously been opened before. I
did
> the same and straightened the shaft that the pointing needle sits on as it
was
> bent. The the needle only moves in the counter clockwise direction because
of
> a wire stop at "0". Is this correct?
>
> If, I move the needle CCW, there is spring tension that returns the needle
to
> "0". If I turn the black plasitc insert in the right angle drive, the
needle
> will move CCW. I am totally confused. Any help is appreciated.
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|