Just turned over the 18V engine (1974) I put in my '67B. No oil pressure!
Last time I did a rebuild, the same thing happened and I discovered I had
used the wrong oil pump gasket. I remember being glad it was on the '77,
because you can remove the oil pan w/o pulling the engine. This time I was
especially careful to check gaskets, although I was not clear on the
difference. SO:
1. Can anybody please explain the difference.
2. What else should I look for?
3. Is it possible to pull the pan after loosening the engine mounts and
jacking up the engine a bit?
HELP!!!
Bill Meyer
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|