It appeared to me that the clutch disk only went in one way. I tried it the
other way and it wouldn't go over the spindle. I will hopefully be alright
but we shall see once I get the new hose. I assume that I will hear a squeal
or something if the disk is in backwards?????
Wesley Ryan
Project Engineer
GI Plastek
Phone: 937-645-4018
Fax: 937-642-5326
Cell: 937-243-0909
-----Original Message-----
From: Ken Waringa [mailto:kwaringa@dynsys.com]
Sent: Monday, December 17, 2001 8:52 AM
To: Ryan, Wesley; 'Dan DiBiase'; Jerry Causey; MG Mailing List
Subject: RE: The famous Clutch!!!
Wesley, yes the clutch disk will go in backwards, very easily! In my case,
when I pushed the clutch in there was a terrible squealing noise. A real
PITA removing the tranny to turn the disk around. I pay real close
attention now. Hopefully your case will just be the weak hose that broke.
Ken
-----Original Message-----
From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On Behalf Of
Ryan, Wesley
Sent: Monday, December 17, 2001 7:40 AM
To: 'Dan DiBiase'; Jerry Causey; MG Mailing List
Subject: The famous Clutch!!!
Ok Ok I know I have been working on my clutch now for weeks and still can't
get it to work right. I bled the clutch over the weekend and while my wife
pushed the petal in; the rubber hose started to spray fluid. she also
mentioned that the petal was getting tough to push. Does this sound like the
hose is bad or can it be something worse that caused the hose to break. It
appears to me that you can't put the clutch in backwards because it won't
slide over the spindle to the transmission. Am I correct? Regardless I am
going to get a new hose I just wanted to know your thoughts.
Wesley Ryan
Project Engineer
GI Plastek
Phone: 937-645-4018
Fax: 937-642-5326
Cell: 937-243-0909
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|