Hi gang,
I think I have a bad heater switch and a bad fan for the 70B. I'm using
a test light to check this so stick with me. I get power from the double
green wires on post 1 of the switch when I turn the ignition on. When I
flip the switch to on , no power transfers to post 2 or 4 on the
switch. If I jump the switch and connect the green and the
green/yellow wires, I get power to the fan but the fan doesn't run. I
disconnected the ground wire from the fan and tried to ground that wire
to a body bolt that was unpainted. No luck. I conclude that the fan is
bad and the switch is bad. Am I right or is it another problem I'm missing?
TIA
Jim
70B
78B
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|