Hello All. In the archives I found the resistance of the sender w/ ignition
off = 31 ohms. Does anyone know or have the ability to measure the
resistance while running with some pressure (i.e. = 50 lbs)?? My manuals
don't give the spec for these. I am guessing it will be somewhere between 31
ohms and ground, and if so, I can substitute a resistor for the sender to
test the gauge.
Any ideas for a reasonable cost alternative, without going to the mechanical
type. I am not crazy about routing an oil line back to a new gauge and
having it leak on my legs when the gauge wears out. BTDT before!!
Thanks a million
Kind regards,
Tim Economu
1969 MGBGT mona
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|