mgs
[Top] [All Lists]

Re: Low pressure after rebuild

To: MG List <mgs@autox.team.net>
Subject: Re: Low pressure after rebuild
From: Max Heim <mvheim@studiolimage.com>
Date: Mon, 10 Sep 2001 14:04:20 -0700
I will second that. When we first fired up this 69 B, its oil pressure
dropped to zero within 5 minutes, according to the electrical gauge. Gary
got hold of one of the later plumbed-in gauges, and now it reads 50 psi
cold, 25 hot at idle (this motor has 75K miles). The gauge is visually
identical, so it's a straight swap (if you can reach behind the dash -- a
big if).

on 9/10/01 12:40 PM, mghirsch at mghirsch@netzero.net wrote:

> But first of all,  the 68 came with an electronic oil pressure sending unit.
> It is very common for those to go bad.  Check the oil pressure with a
> mechanical gauge before doing any teardown.
> 
> Maynard Hirsch
> 78B
> 67B
> 86 XJ6
> 


--

Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the red one with the silver bootlid.

///
///  mgs@autox.team.net mailing list
///  (If they are dupes, this trailer may also catch them.)


<Prev in Thread] Current Thread [Next in Thread>