1. loose connection somewhere letting in air (recheck & tighten fittings)
2. it's the MC
"When you have eliminated the impossible, whatever remains, however
improbable, must be the truth"
on 7/31/01 10:43 AM, James Nazarian Jr at jamesnazarian@netzero.net wrote:
> List,
>
> I am having a clutch problem that I am looking for input on.
> The M/C is about 5years old, the slave about 2weeks, and the
> flex hose is a few days old.
>
> I just replaced the clutch recently and have been having this
> problem ever since. When I bleed the clutch I get good pedal
> feel and good travel at the yoke, but within seconds after
> I have no pedal at all. I am sure I am getting the air out.
> After loosing the pedal it can be pumped back up, implying that
> there is air in the system, but I can't find any. This problem
> is what led to the changing of the slave and of the hose, but
> to no avail. What else could be a problem that could be causing
> the system to act as if there is air in it. I have gone so far
> as to bleed half a bottle of fluid through the system, so I am
> sure I am getting any air that could be in. I have bled by
> mity-vac and with the pedal.
>
> HELP!
>
> Thanks
--
Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the red one with the silver bootlid.
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|