Re: 1 3/4" SU

["WCAMEYER" <WCAMEYER@email.msn.com>]

Bill,

What needles are you using in your HS6's?
My setup is losing power at about 4-4500 rpm on a worn engine, and I wonder
if the needles  could be the problem.  Foot to the floor, it really sputters
and dies.  With careful footfeed modulation, it will keep accelerating, but
with noticeably less oomph!!

Bill Meyer

///
///  mgs@autox.team.net mailing list
///  (If they are dupes, this trailer may also catch them.)