Mike:
Sounds like two problems to me.
For number one cylinder dead, I believe you have a bad wire, plug, or poor
compression.
For all dead, it sounds like you shorted out the points when you reinstalled
them, or have a bad cap or rotor. You may also have the timing off by alot.
Good luck.
Try retracing your steps back to when you had things sort of running. Then
work on number 1.
Kind regards,
Tim Economu
'69 MGBGT mona
>>>
#1 Cylinder dead, #2 Cylinder weak spark, 3 and 4 seemed ok
Replaced Plugs. #1 still dead #2 weak and 3 and 4 ok
Removed plate points condenser sit on cleaned out cap and dizzy
reassembled and now nothing works
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|