Losing ground. Now it won't even start. Engine turns, but won't
catch. Regapped the points, cleaned everything in the cap, new spark
plugs, switch plug wires around, hope I did not get them out of order,
labeled them, switched caps, no start. Could the condenser cause #1
not to fire and then go bad and not let anything fire?
Also, to verify that I did not get the wire out of order:
as one is looking at the dizzy with the cap on, the top left plug wire
goes to #2 cylinder, moving to the right that wire goes to #4
cylinder, dropping down that wire goes to #3 and moving back to the
left that wire goes to #1.
Boy that is tough to follow!
Any and all help is appreciated.
MIKE
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|