Thanks for the reply Lawrie. Are you talking about the stamping on the
aluminum carrier? Aren't the aluminum carriers
interchangeable between the early MGB and the MGA? If so, that doesn't really
tell me if the axle (housing) is an MGA or an MGB,
right?
Thanks.
Larry
>-----Original Message-----
>From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
>Behalf Of British Sportscar Center
>Sent: Tuesday, January 16, 2001 2:32 PM
>To: Larry Hoy; MG list
>Subject: Re: MGA vs early MGB axle
>
>
>Larry,
>
>Somewhere on the periphery of the diff unit, where it bolts to the housing,
>there should be stamped either 10/39 (MGB) or 10/43 (MGA)
>
>Lawrie
>British Sportscar Center
|