Hi Bob I've talked to several people about this bushing. Apparently Lucas, in
there infinite wisdom, made two slightly different
bushings. Neither are just "straight through" bushings, or at least one of
them has a "step" in it! Turns out mine is the one with
the step. So the bushing isn't available "off the shelf".
So today I will be talking to Peter at:
World Wide Auto Parts
2517 Seiferth Rd., Madison, WI 53716
(800) 362-1025 Fax (608) 223-9403
WWAP makes the proper bushings for a Lucas distributor. They cost $20.00.
Thanks for your offer but looking around for a bushing won't be necessary!
No, I have no interest in World Wide Auto Parts.
Larry Hoy
>-----Original Message-----
>From: Mgbbob@aol.com [mailto:Mgbbob@aol.com]
>Sent: Tuesday, January 09, 2001 8:35 PM
>To: larryhoy@prodigy.net; mgs@autox.team.net
>Subject: Re: Lucas 25D distributor bushing
>
>
>Larry
>I haven't rebuilt any distributors but, if the bushing is brass or bronze,
>they should be available from any tool or industrial bearing supplier.
>If you measure the OD and ID, I'll do some research for you.....and the
>price?...usually $3.00 or $4.00
>Bob Stahlbush
>66 MGB GHN3LO 78708
>60 TR3A TS 81398L
|