The day before yesterday I wrote:
> Hi Gang,
> I have just received from Moss Motors the rubber
> gasket/grommet and the metal clip necessary to install
> the temperature sensor into the upper reservoir of the
> radiator of my '79 B. The retaining clip was missing
> on my car so the sensor was being held in place mostly
> by faith -- until faith failed.
> When I reinstall the sensor using the correct parts,
> should there be any sealant used or is the rubber-to-
> steel seal sufficient? Thanks in advance for your good
> advice.
Many offered good advice and I installed the sensor
without sealant. All went perfectly. The system, shoddy
as it appears, works perfectly. Couldn't ask for more.
My 14 y/o son and I took a couple of parade laps
around the block then decided to clean up the garage!
Our 21 year old once flooded under 12 feet of water,
project B is back on the road! YeeeeHaaaaa
Now, the '70 B-GT needs the same treatment!
Rick
|