I was probably the one complaining a few months ago about fitting problems
with the PECO exhaust. Fiting it to a non-PECO header (LCB, 1 7/8") was a
hassle. I had to cut almost 24" of pipe from the lengths that came with the
kit, but once I got it all figured out, it works pretty well. Be sure to give
yourself plenty of time to do it, and make sure you've got tools to cut the
pipe, and it won't be a killer. Sounds good once it's done!
Matt
"Ptegler" <ptegler@gouldfo.com> wrote:
> Mine fit perfectly, once I got the center pipe the right way around
> end for end. (full header and pipe system)
>
> Paul Tegler wizardz@toad.net http://www.teglerizer.com
>
>
>
> ----- Original Message -----
> From: "Baker, G." <gbaker@customcpu.com>
> To: "MG Board" <mgs@autox.team.net>
> Sent: Wednesday, September 27, 2000 4:09 PM
> Subject: Peco Exhaust System
>
>
> Does anyone have anything bad to say about the Peco Exhaust System?
> I thought I read a while back about it not fitting up without MAJOR
> work.
> Thanks,
> Gregg Baker
____________________________________________________________________
|