Check the blue/light-green for 12v with the switch in the fast position. If
it is on the wire the switch is OK, the problem is either the connector or
the brush on the motor, fast uses a different brush to normal. If no 12v on
the wire it is the switch.
PaulH.
----- Original Message -----
From: Evangelos G. Makris <xirias@hol.gr>
To: <mgs@autox.team.net>
Sent: Wednesday, September 27, 2000 7:48 AM
Subject: no fast wiper speed
> How could I go about investigating the cause of my wipers stopping when
> I push the rocker switch to its last (lowermost - fast wiping)
> position?
>
> Evangelos
> 73 BGT
>
>
>
|