Carl,
The plugs will operate more efficiently if you swap the wires. If you do it
with the ignition switched 'OFF', you should be able keep all of the smoke
inside of the wires.
Carl W French wrote:
> I am working on putting in a new coil into my 67 Pos grnd MGB. The wire
> going from the batt to the coil was attached at the + terminal and the wire
> that goes to the side of the dist is attatched to the - terminal. Isn't
> this backwards for a pos grnd? I am afraid to lose all the smoke in the
> wires. In process right now and I would like to take it to work in the am
> after a test ride tonight (HELP)
> Carl French
> 67B
--
Bud Krueger
http://home.ici.net/~bkrueger/
52TD
77MGB
|