Waxoyl is probably too soft for underbody, the same company makes a more
robust proguct based on Waxoyl for those areas, called Finnigans Underbody
Seal with added Waxoyl, funnily enough.
Basically Waxoyl goes in any cavity, like sills, inner and outer. Doors.
Rear wings over the arch and behind the B post. Chassis rails. Bonnet and
boot reinforcing channels and bonnet front lip. Inside crossmembers. Box
sections over the inner wings at the rear of the engine compartment. Plus
behind front and rear aprons (might need underbody here), bumpers and
overiders, headlight rings, side strips, under bonnet slam panel.
PaulH.
----- Original Message -----
From: Louis Mehr (EML) <Louis.Mehr@eml.ericsson.se>
To: <mgs@autox.team.net>
Sent: Tuesday, August 15, 2000 12:13 PM
Subject: Wanted: definitive list of waxoyl injection points + rustproofing
advice
> Hi MG World,
>
> 1/ Does someone have a definitive list of waxoyl injection points for an
MG B roadster?
>
> 2/ For the underside of my car I've been advised to remove loose underseal
then apply Red Oxide primer then Body Shutz over the top. Would oil/waxoyl
be better ?
>
>
>
> Thanks
>
> Louis Mehr
> 1971 LHD MGB
> England UK
>
|