In a message dated 26/07/00 8:08:00 AM Pacific Daylight Time,
owner-mgs-digest@autox.team.net writes:
> I need to replace the rear shocks in my 69 MGC Roadster.
> Which would you suggest?
>
> 1. Have the lever arm shocks rebuilt along with installing the heavy-duty
> shock valves.
> 2. Install the Monroe Tube shock conversion from Moss.
> 3. Install the SPAX tube shock conversion.
You don't say what you do with the car. If you like slaloming, then any of
the 3 would work. If you are street driver, then #1 without the stiffer
valves woudl probably be fine.
One caveat - don't fit tube shocks if you ever intend to go to a dual exhaust
system - there isn't enough room on a C for both.
Bill S.
69 MGC
|