Fiberglass is not hard to cut, you can use almost anything, depending on the
thickness - from a Skil saw to a grinder. Seriously though, the grinder
ought to work fine. I don't know what kind of grit, etc you have but most
anything works. If you wind up with a bit of a jagged edge you can sand it
smooth, that's the beauty of the material. Also if you completely screw the
thing up you can easily re-glass it.
use my cutting discs on my grinder? They
> are 1/32 thick some kinda somthing that has a slight pattern like fiber
> matt. They cut metal beautifully and smoothly, but will they work on
> fiberglass, or do I need somthing special to cut it
|