I am also contemplating converting my 74 B from steel wheels to wire wheels.
I thought I had heard the whole rear end needed to be changed because of
different axle lengths between wire and steel wheel cars. I can't remember
if this was for the Midget or B though. Any advise would be appreciated.
Ken
71 TR6 (my latest toy)
74 Midget (son's daily driver)
74 B (next project)
79 B (son's project with dad's help)
75 B (parts car)
-----Original Message-----
From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net] On Behalf
Of Duinhoven_Hans@emc.com
Sent: Thursday, July 06, 2000 4:35 AM
To: Bmgreen@aol.com; mgs@autox.team.net
Subject: RE: Wire wheel conversion
Hi Stephen,
Welcome to MG land!
First you need wired wheels either painted or chromed (mine are chromed and
beautiful!)
Front: you need wire wheel hubs instead of the current ones.
When swapping these you might to replace the bearing as well, as you have to
do the bearing shimmed again.
Rear - more complex you have to replace the half shafts or find an exchange
rear drive axle.
Parts manuals will show difference details on both front and rear. I have an
older version of the USA Moss catalogue - works well in combination with the
Haynes manual.
Hope this helps a bit.
Cheers,
Hans
'71 BGT
-----Original Message-----
From: Bmgreen@aol.com [mailto:Bmgreen@aol.com]
Sent: donderdag 6 juli 2000 11:14
To: mgs@autox.team.net
Subject: Wire wheel conversion
I have recently purchased a 64 B, after literally months of looking. As I
told the seller, I am worse than one of my daughters before Christmas (while
waiting to pick the car up). Publicly, I would like to thank my wife for
putting up with my search, and allowing me to pursue just the right one.
My question: how difficult, and what are the steps, to convert from steel
rims to wires? While I have considerable experience working on B's in years
past, this is one project I have not attempted. Difficulties? Parts?
Advice as to whether to undergo the project, or not?
Thanks,
Stephen, Plano Texas
64 B (Dang it's good to be able to say (type) that)
|