The stuff I used is not a spray. It is a 3M contact cement that comes in a
tube. It is repositionable to an extent, but I agree with Dan that four
hands make it easier.
Allen Hefner
- - - - - - - - - - - - - - -
In a message dated 6/20/00 6:18:33 PM Eastern Daylight Time,
danray@bluegrass.net writes:
<< I used 3M spray adhesive as well, although contact cement would probably
work if you don't want to worry about overspray. Just make sure that you are
positive about the alignment of the fabric once you lay it on, because it
will STICK! (Four hands is better than two) I suppose contact cement might
be a bit more forgiving if you misaligned the fabric on the header.
<< SNIP >>
I picked up a tube of 3M vinyl trim adhesive at Pep Boys
and
> it worked fine for the hood on my Midget. >>
|