At 08:22 AM 6/8/2000 -0700, wcameyer wrote:
>Try lubing the cable first. If that does not work, remove the speedo, open
>it up, and clean and lube it - rthis does wonders.
>
>bill
>
How do you lube the speedometer? I have one speedometer with a jumpy needle
at sppeds over 60 mph. I know the cable is good because the other
speedometer that I was using was very steady at all speeds even up to 100
mph. However, that speedometer was a regular one on an o/d transmission so
it was reading about 28% too high. If I could just put the fix on the right
transmission, then I would use it. I just don't remember any area that I
would lube.
David
67 BGT
71 BGT
|