Perhaps this also is an indication for the other "green" problems....
Cheers,
Hans
-----Original Message-----
From: Paul Hunt [mailto:paul.hunt1@virgin.net]
Sent: donderdag 1 juni 2000 10:47
To: Enrique Claure; mgs@autox.team.net
Subject: Re: Reverse light switch
Right - engaging reverse gear should close the switch, anything else open
it. The switch screws in to the gearbox casing and depth of engagement can
affect the switch operation - if it isn't screwed in far enough the switch
won't close.
Do you mean you have three greens coming out of the sub-harness that goes
down to the gearbox? That surprises me, I would have expected one green
plus a green/brown coming back to feed the lights, plus maybe a yellow and
yellow/purple or white/brown for the O/D and TCSA circuits.
If you have a found a cut green you have to ask yourself why - maybe it was
grounding somewhere and a PO cut it to stop it blowing fuses rather than fix
it properly.
PaulH.
----- Original Message -----
From: Enrique Claure <spanlab@ceibo.entelnet.bo>
To: <mgs@autox.team.net>
Sent: Wednesday, May 31, 2000 11:30 PM
Subject: Reverse light switch
> Hi list, there are three cables coming out of the harness that point
> downwards toward the reverse switch. One of them was cut so I assumed it
> was the power to the switch. Maybe I'm wrong if so what are the two other
> green bullets for? thanks, Enrique
>
> how can I test my reverse switch to see if it works? Continuity upon
> engagment of reverse gear should vary right?
> SPAN Inc (Miami Forwarding office)
> 10580 NW 8th Lane
> Miami Fl 33172
> PH 3055512060
>
> SPAN Inc HeadQuarter
> PO BOX 6524
> La Paz Bolivia
> South America
>
>
|