Did someone else recently have this?
Positions are as James has already said. Parking is via the slow speed
winding and wiring so if it parks with the switch up those must be OK. It
is almost certainly the switch not making proper contact in the middle
position. I have schematic and explanatory diags for the wipers on the web
site below - select 'Spanners', 'Electrics', 'Schematics' and 'Wipers'.
PaulH.
http://www.mgb-stuff.org.uk
----- Original Message -----
From: Craig D. Niederst <niederst@telerama.com>
To: MG List <mgs@autox.team.net>
Sent: Monday, May 22, 2000 3:40 AM
Subject: Horn and wiper switch question
> Since my old wiper switch was shot (DPO had spliced in a toggle switch
> under the dash), I replaced it with a used one I had on hand. If I put
> the switch in the down position, the wipers turn on, and if the stalk is
put
> back to the center (off) position, they stop wherever they are . If I put
> the switch in the up position, the wipers park back to their normal
resting
> position. Is this right?
|