take the belt to napa or some other reputable parts
place and give them the belt part# if it is still
visiable and they can cross it to one the next size
shorter which will be either 1/2 or 1 inch shorter.
Or, if you don't have a part # they can measure it on
a belt measuring device and get you one a little
shorter.
--- Mike Razor <mrazor@mis.net> wrote:
> Have had a rattle for years in the TD and I think I
> found it! It seems
> that the generator is a hair to close to the bonnet
> and banks on it
> sometimes. Now the problem is, that the belt is to
> loose to push the
> generator in and I assume I have the correct size
> belt, but don't
> know. Any suggestions?
> Also, thanks to all for the virus warning. I had
> the word as quick as
> our computer gurus did. The only problem was my
> work laptop may have
> a dose of it and they took it to make sure.
> MIKE R
>
|