I looked far an near for a source of PoziDrive bits. I overlooked the obvious,
my local LBC guy
has them in stock, and pretty cheap I might add. He gets them from the Mac
Tool salesman.
Larry Hoy
> -----Original Message-----
> From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
> Behalf Of Dave Wood
> Sent: Sunday, April 23, 2000 1:01 PM
> To: MGB
> Subject: Re: PoziDrive !
>
>
> Interesting article Ed, I've been looking for source for the Posidriv bits
> since I learned they existed (recently). I wondered why my phillips
> buggered the screw heads on most of the screws in my MG (especially after 28
> years of removing some of them).
>
> Dave 72 B
> -----Original Message-----
> From: JustBrits@aol.com <JustBrits@aol.com>
> To: spridgets@autox.team.net <spridgets@autox.team.net>;
> healeys@autox.team.net <healeys@autox.team.net>; mgs@autox.team.net
> <mgs@autox.team.net>; mg-t@autox.team.net <mg-t@autox.team.net>
> Date: Sunday, April 23, 2000 11:02 AM
> Subject: PoziDrive !
>
>
> >Folks:
> >
> >I have put up on my site two page written by Norman Nock and a tool page
> >regarding all about PoziDrive fasteners for your info.
> >
> >Norman's article is about 3rd generation and a fax to boot so I had to
> >display kind large which actually helped with the diagrams. I left the tool
> >page same size for same reason.
> >
> >Sorry, but I have just not had time to make "links" on main page nor from
> one
> >to the other. It was enough of a PITA for this BASIC beginner, as is<G>!!
> >
> >Still, better than "nada"!!
> >
> >Cheers...........
> >
> > Ed
> >
> >http://www.justbrits.com/pozdriv1.htm
> >http://www.justbrits.com/pozdriv2.htm
> >http://www.justbrits.com/pozdriv3.htm
> >
>
|