I've not done it but the destructions just say "Unscrew the starter unit
retaining screws and remove the cover plate. Withdraw the starter unit
assembly and remove its gasket. Withdraw the valve spindle and remove the
'O' ring, seals and dust cap."
If that is any help.
----- Original Message -----
From: <ahhclem@kcnet.com>
To: <mgs@autox.team.net>
Sent: Tuesday, April 11, 2000 3:03 AM
Subject: HIF4 cold start valve
> What's the trick to getting the cold start valve out of the carburetor
body?
>
> Rick Jennings
>
>
|