Yes, but my problems were mainly with the brake master. When rebuilding
it the pistons have to be seperated and there is a little metal cup on a
very heavy spring in the middle. I managed to launch the cup across my
garage twice, and all told spent five or so hours looking for it.
James Nazarian
'71 B roadster
'71 BGT rust free and burnt orange
'63 Buick 215
On Fri, 7 Apr 2000, Robert Sexson wrote:
>
> I removed the clutch master cyl. yesterday and disassembled. The rubber cup
> was folded up on the side of the spring. I installed new kit and reinstalled
> the cyl. in the B. Bleed the system and it seems to work fine. Has about an
> inch of slave travel and no leaks.
>
> Another question. Has anyone, other than me, cussed when removing and
> reinstalling the DARN thing?
>
> R. Sexson
> 74.5 B
>
>
>
>
>
> Get 100% FREE Internet Access powered by Excite
> Visit http://freelane.excite.com/freeisp
>
|