Enrique,
I'm speaking from memory since I don't have my wiring diagram right here in
front of me, but my 79 MIDGET also has the same three wires with no where to
connect. (little white nylon inline connector) I traced everything out and
found that my engine has electronic ignition and no Ballast Resistor. (I
don't know if the PO changed out the ignition or if the factory did) The
bottom line was those three wires did nothing. I taped them back out of the
way and left them be.
Chuck Young
Las Vegas, NV
1979 RED MIDGET
----- Original Message -----
From: Enrique Claure <spanlab@ceibo.entelnet.bo>
To: <mgs@autox.team.net>
Sent: Friday, March 17, 2000 7:08 PM
Subject: Three strange cables
> Hi Listers, I am tidying the cables in my engine bay. There are three
> cables connected to a female plug. Cables are WU (white blue), WB (white
> black), W(white). My Haynes diagram shows these three cables
> connect to the distributor. Both my old and new dizzies have only one
black
> cable coming from the side.
>
> WB is lead from the coil
> WU right side of the dizzy resistor
> W left side of the dizzy resistor
>
> where and how do I hook these cables?
>
> Thanks, Enrique
>
>
>
|