You might give Cam Techniques a call. They're located in Sarasota (813) 351
4994. I had some ideas about the cam grind I wanted for my 69 B. They have
a lot of experence with MG's and came recommeded so I gave them a call.
They were able to deliever a custom cam using my specs at a reasonable cost.
Tuck Southworth
69 B hers
55 TF all mine
> Hello All.
>
> Been looking at costs to rebuild the motor in my special Tuning B.
> Seemingly, the best thing to do is go with a stock short engine and
rebuild
> my own head, doing the unleaded thing at the same time.
> According to the Pluspac S info I have, the engine is standard apart from
> the cam. So, Does anyone know where I can get one, or find an equivalent
> (e.g. Kent, Piper, etc.). Specs as follows....
>
> Cam: C-AEH 864
> Lift: 0.252" (6.35 mm)
> Inlet: opens 36 deg. BTDC, closes 52 deg ABDC
> Exhaust: opens 56 deg. BBDC, closes 32 deg. ATDC
>
> Also, the head is listed as a C-AHT 100A, 35cc unit. The gasket is a C-AEH
> 768. Any ideas as to an equivalent for this gasket?
>
> Many thanks,
>
> Dave Hill, UK.
>
> Can I Telework for you? See what I do, at...
> http://www.angelfire.com/biz4/davtel/index.html
> Troubled by a phobia? Know someone who has one? Go to...
> http://www.angelfire.com/de/ukphobias/index.html
>
>
|